4R 904C
Loading...
Produktnummer:
SWD100005
Produktinformationen "4R 904C"
Application Power definition
5A Continuous operation
w/100% load Load factor: ≥ 60 %, operating hours: unrestricted, overload: fuel stop (ICFN)
5B Continuous operation
w/variable load Load factor: < 60 %, operating hours: unrestricted, overload: fuel stop (ICFN)
Power output within 5% tolerance at standard conditions. Power definition according to ISO 3046 (ratings also correspond to SAE J 1995 and SAE J 1349 standard conditions)
Consult your distributor/dealer for the rating that will apply to your specific application.
Standard equipment
Starting system Electrical starter 24 V, alternator 28 V/80 A
Fuel system High pressure fuel injection with solenoid-valve controlled unit injection pumps and
multijet fuel injectors, fuel filter
Lube oil system Oil filter
Air system Turbo charging with charge-air cooling
Exhaust gas system Tree valves per cylinder
Coolant system Water-charge-air cooling
Flywheel/housing SAE 2
Engine mounting Resilient
Electronics and instrumentation Electronic engine management
Optional equipment
on request
Reference conditions:
> Intake-air temperature: 25°C (77°F)
> Ambient air pressure: 1000 mbar (14.5 psi)
> Altitude above sea level: 100 m (328 ft)
Subject to change without notice. Customization possible.
Engines illustrated in this document may feature options not fitted as standard.
Anmelden
folgende Produkte könnte Sie auch interessieren
6R 906C
15.000,00 €*
Abonnement
Application Power definition
5A Continuous operation
w/100% load Load factor: ≥ 60 %, Operating hours: unrestricted, Overload: Fuel stop (ICFN)
5B Continuous operation
w/variable load Load factor: < 60 %, Operating hours: unrestricted, Overload: Fuel stop (ICFN)
Power output within 5% tolerance at standard conditions. Power definition according to ISO 3046 (ratings also correspond to SAE J 1995 and SAE J 1349 standard conditions)
Consult your distributor/dealer for the rating that will apply to your specific application.
Standard equipment
Starting system Electrical starter 24 V, alternator 28 V/80 A
Fuel system High pressure fuel injection with solenoid-valve controlled unit injection pumps and
multijet fuel injectors, fuel filter
Lube oil system Oil filter
Air system Turbo charging with charge-air cooling
Exhaust gas system Tree valves per cylinder
Coolant system Water-charge-air cooling
Flywheel/housing SAE 1/SAE 2
Engine mounting Resilient
Electronics and instrumentation Electronic engine management
Optional equipment
on request
Reference conditions:
> Intake-air temperature: 25°C (77°F)
> Ambient air pressure: 1000 mbar (14.5 psi)
> Altitude above sea level: 100 m (328 ft)
Subject to change without notice. Customization possible.
Engines illustrated in this document may feature options not fitted as standard.
4R 924C
15.000,00 €*
Abonnement
Application Power definition
5A Continuous operation
w/100% load Load factor: ≥ 60 %, operating hours: unrestricted, overload: fuel stop (ICFN)
5B Continuous operation
w/variable load Load factor: < 60 %, operating hours: unrestricted, overload: fuel stop (ICFN)
Power output within 5% tolerance at standard conditions. Power definition according to ISO 3046 (ratings also correspond to SAE J 1995 and SAE J 1349 standard conditions)
Consult your distributor/dealer for the rating that will apply to your specific application.
Standard equipment
Starting system Electrical starter 24 V, alternator 28 V/80 A
Fuel system High pressure fuel injection with solenoid-valve controlled unit injection pumps and
multijet fuel injectors, fuel filter
Lube oil system Oil filter
Air system Turbo charging with charge-air cooling
Exhaust gas system Tree valves per cylinder
Coolant system Water-charge-air cooling
Flywheel/housing SAE 2
Engine mounting Resilient
Electronics and instrumentation Electronic engine management
SCR aftertreatment system
Engine mounted SCR components with urea dosing unit, urea injection nozzle and heating
valve, (engines with EPA Tier 4i/vehicle mounted SCR components with SCR catalyst
including muffler, urea supply unit and SCR control unit EU Stage 3B certification only)
Optional equipment
on request
Reference conditions:
> Intake-air temperature: 25°C (77°F)
> Ambient air pressure: 1000 mbar (14.5 psi)
> Altitude above sea level: 100 m (328 ft)
Subject to change without notice. Customization possible.
Engines illustrated in this document may feature options not fitted as standard.
S60 14 EPA2
12.000,00 €*
Abonnement
Standard equipment
Starting system Electric starter 12 V, alternator 28 VDC/70 amp, belt driven
Fuel system Fuel main filter and pre-filter, electronic unit injection system
Lube oil system Lube oil filter
Combustion air system Set of dry-type airfilter with contamination indicator
Exhaust gas system Turbocharger outlet connection and mounting parts
Coolant system Radiator-cooler with mechanically driven fan for engines with air charge air cooling, with
connecting parts for engine coolant circuit designed for 100% engine power, cooling air
pressure loss 200 Pa , 40°C/104°F ambient air temp.
Flywheel/housing Cast iron flywheel housing
Engine mounting Resilient
Optional equipment
Starting system Electric starter 24 V
Fuel oil system Electrical preheating unit
Flywheel/housing Flexplate for Allison transmission
Accessory drives One accessorie drive for front or rear mounts
Certification EPA, EU and MSHA/Canmet nonroad certification
Reference conditions:
> Intake-air temperature: 25°C (77°F)
> Ambient air pressure: 1000 mbar (14.5 psi)
> Altitude above sea level: 100 m (328 ft)
Subject to change without notice. Customization possible.
Engines illustrated in this document may feature options not fitted as standard.
S60 12,7 CI EPA2
12.000,00 €*
Abonnement
Standard equipment
Starting system Electric starter 12 V, alternator 28 VDC/70 amp, belt driven
Fuel system Fuel main filter and pre-filter, electronic unit injection system
Lube oil system Lube oil filter
Combustion air system Set of dry-type airfilter with contamination indicator
Exhaust gas system Turbocharger outlet connection and mounting parts
Coolant system Radiator-cooler with mechanically driven fan for engines with air charge air cooling, with
connecting parts for engine coolant circuit designed for 100% engine power, cooling air
pressure loss 200 Pa , 40°C/104°F ambient air temp.
Flywheel/housing Cast iron flywheel housing
Engine mounting Resilient
Optional equipment
Starting system Electric starter 24 V
Fuel oil system Electrical preheating unit
Flywheel/housing Flexplate for Allison transmission
Accessory drives One accessorie drive for front or rear mounts
Certification EPA, EU and MSHA/Canmet nonroad certification
Reference conditions:
> Intake-air temperature: 25°C (77°F)
> Ambient air pressure: 1000 mbar (14.5 psi)
> Altitude above sea level: 100 m (328 ft)
Subject to change without notice. Customization possible.
Engines illustrated in this document may feature options not fitted as standard.
4R 924C
12.000,00 €*
Abonnement
Application Power definition
5A Continuous operation
w/100% load Load factor: ≥ 60 %, operating hours: unrestricted, overload: fuel stop (ICFN)
5B Continuous operation
w/variable load Load factor: < 60 %, operating hours: unrestricted, overload: fuel stop (ICFN)
Power output within 5% tolerance at standard conditions. Power definition according to ISO 3046 (ratings also correspond to SAE J 1995 and SAE J 1349 standard conditions)
Consult your distributor/dealer for the rating that will apply to your specific application.
Standard equipment
Starting system Electrical starter 24 V, alternator 28 V/80 A
Fuel system High pressure fuel injection with solenoid-valve controlled unit injection pumps and
multijet fuel injectors, fuel filter
Lube oil system Oil filter
Air system Turbo charging with charge-air cooling
Exhaust gas system Tree valves per cylinder
Coolant system Water-charge-air cooling
Flywheel/housing SAE 2
Engine mounting Resilient
Electronics and instrumentation Electronic engine management
SCR aftertreatment system
Engine mounted SCR components with urea dosing unit, urea injection nozzle and heating
valve, (engines with EPA Tier 4i/vehicle mounted SCR components with SCR catalyst
including muffler, urea supply unit and SCR control unit EU Stage 3B certification only)
Optional equipment
on request
Reference conditions:
> Intake-air temperature: 25°C (77°F)
> Ambient air pressure: 1000 mbar (14.5 psi)
> Altitude above sea level: 100 m (328 ft)
Subject to change without notice. Customization possible.
Engines illustrated in this document may feature options not fitted as standard.
6R 926C
12.000,00 €*
Abonnement
Application Power definition
5A Continuous operation
w/100% load Load factor: ≥ 60 %, operating hours: unrestricted, overload: fuel stop (ICFN)
5B Continuous operation
w/variable load Load factor: < 60 %, operating hours: unrestricted, overload: fuel stop (ICFN)
Power output within 5% tolerance at standard conditions. Power definition according to ISO 3046 (ratings also correspond to SAE J 1995 and SAE J 1349 standard conditions)
Consult your distributor/dealer for the rating that will apply to your specific application.
Standard equipment
Starting system Electrical starter 24 V, alternator 28 V/80 A
Fuel system High pressure fuel injection with solenoid-valve controlled unit injection pumps and
multijet fuel injectors, fuel filter
Lube oil system Oil filter
Air system Turbo charging with charge-air cooling
Exhaust gas system Tree valves per cylinder
Coolant system Water-charge-air cooling
Flywheel/housing SAE 1/SAE 2
Engine mounting Resilient
Electronics and instrumentation Electronic engine management
SCR aftertreatment system
Engine mounted SCR components with urea dosing unit, urea injection nozzle and heating
valve, (engines with EPA Tier 4i/vehicle mounted SCR components with SCR catalyst
including muffler, urea supply unit and SCR control unit EU Stage 3B certification only)
Optional equipment
on request
Reference conditions:
> Intake-air temperature: 25°C (77°F)
> Ambient air pressure: 1000 mbar (14.5 psi)
> Altitude above sea level: 100 m (328 ft)
Subject to change without notice. Customization possible.
Engines illustrated in this document may feature options not fitted as standard.